A2+ Home Music System w/ Bluetooth aptX

A2+ Home Music System w/ Bluetooth aptX

Step 1: Connect the included speaker wire from the A2+ left (powered) speaker to the right (passive) speaker, observing proper polarity to each speaker connector.

No Image

1) Use your thumb and finger to unscrew the binding post connectors on the back of each speaker.

2) Insert each speaker wire into the holes on the side of binding post connectors, making sure to connect the positive (+) terminal on the left speaker to the positive (+) terminal on the right speaker.

3) Retighten the binding posts with your fingers.

4) Verify that only the exposed portion of the speaker wire is secured firmly in each connector.

5) Make sure that none of the speaker wire strands have come in contact with an adjoining terminal.

Step 2: Verify that the volume/power knob on the rear panel of the left speaker is in the OFF position by rotating the knob until it clicks off..

Step 3: Connect the cable from the external power supply to the A2+ left speaker rear panel.

Step 4: Connect the Ac power cord to the other end of the power supply, and plug the cord into a functioning power outlet. A light on the power supply should be illuminated.

Wireless Connection

Step 1: Turn power on via the rear panel volume/power knob.
A2+ Wireless will automatically go into Bluetooth "pair mode" and the Pair button on the A2+ Wireless rear panel will start flashing.

Step 2:: On your device (phone, tablet, computer, etc), turn on Bluetooth and go to Bluetooth preferences.

Step 3: Select "Audioengine A2+" to pair and connect. The Pair indicator on the A2+ rear panel should be solid.

Step 4: Play your music and adjust volume levels on A2+ Wireless and your device.

Step 5: To add additional devices put A2+ back into pair mode by disconnecting A2+ from your device or by pressing and holding the Pair button on the A2+ Wireless rear panel until the pair indicator starts flashing. Repeat steps 2-4 to connect another device.

A2+ can wirelessly connect to only one device at a time, however it will pair with and remember up to 6 different devices.

Wired Connection

Step 1: Connect an audio cable between your device and one of the inputs on the A2+ rear panel.

Step 2: Play your music and adjust the volume on the speakers and your device to the desired listening levels.

USB Audio Connection

Step 1: Connect the included USB cable between your computer and the USB input on the rear panel of the left powered speaker.

Step 2: If using Windows, the A2+ should be recognized automatically. For MacOS, under System Preferences/Sound/Output, select "Audioengine A2+".

For the full setup guide, download the attached PDF:
A2+ Wireless Quickstart Guide

Back to blog