HD6 Home Music System w/Bluetooth aptX-HD

HD6 Home Music System w/Bluetooth aptX-HD

Step 1: Connect the speaker wire from the HD6 left (powered) speaker to the right (passive) speaker.

Step 2: Connect the wireless antenna to the HD6 rear panel.

Step 3: Connect the power cable to the HD6 rear panel and plug the other end into an AC power outlet.

Wireless Connection

Step 4: Turn on the HD6 power switch located on the rear panel.  HD6 will automatically go into Bluetooth "pair mode" and the Pair button on the HD6 rear panel should start flashing.

Step 5: On your device (phone, tablet, laptop, etc), turn on Bluetooth and go to Bluetooth preferences.

Step 6: Select "Audioengine HD6" to pair and connect.  The Pair indicator on the HD6 rear panel should be solid.

Play your music and adjust volume levels on HD6 and your device.

Step 7: To add additional devices put HD6 back into pair mode by disconnecting HD6 from your device or by pressing and holding the Pair button on the HD6 rear panel until the pair indicator starts flashing.

HD6 can wirelessly connect to only one device at a time, however it will remember up to six different devices.

Wired Connection

Step 8: Connect one of the included audio cables to your music player (phone, tablet, computer, TV, etc) and the other end to an input on the HD6 rear panel.

Step 9: Play your music and adjust the volume on the speakers and your device to the desired listening levels.

HD6 Home Music System w/Bluetooth aptX-HD


For the full setup guide, download the attached PDF
HD6 quickstart guide_V01-WEB


HD6 Setup Video

Back to blog